Keychains Hex Led Display for KYZ HSW Stand - Drak
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
4,00 € – 4,89 € netto (bez VAT)
Dla pliku: Led Light Keychains Prusa XL_0.4n_0.25mm_PLA,PLA_XLIS_3h5m.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 4,44 € netto (środek widełek).
- Masa podana przez autora
- 84 g
- Czas druku podany przez autora
- 3,08 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Customizable Led Text Display & Source of Light 2 in 1
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 502
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Customizable Led Text Display & Source of Light
2 in 1
Make your own Led Light Text, using CAD Software Guide:
1. First make sketch of your text, recommended text height is 40 mm
2. Measure your whole text width, if its for example more than 270mm (like on picture below), then download “Led Light Raw 280 mm.step” file
3. Import downloaded .step file into your design and cut it using the sketched text
4. then make an extrusion of the text as new component, extrude it to 0.5 mm
5. using the same text sketch, use it to cut the text conturs in Led Light Bar (the part u have inported)
6. export text and Led Light as one component (but they are still separated, text and Led Light are separated components)
7. drag exported .step file into Bambu Studio or Orca Slicer
8. go to the object view in Process section and you can see your imported .step file consists of two separated components
9. choose text to be printed out of white filament
10. Set white filament to be printed before black, it makes print looking better
Tutorial Video:
Hardware:
- Option 1 (no soldering)
5V, 5mm Led, White 6000K, 1m (I bought it from here)
- Option 2 (you gain on/off switch, soldering needed)
5V, 5mm Led, White 6000K, 1m (I bought it from here)
USB Connector Cable with On/Off Switch (I bought it from here)
Additionally you can buy cable gland, but is not needed, you can use zipties to securly hold wires in place instead of cable gland:
Cable Gland M8-4 GY 1pcs (I bought it from here)
--- Commercial Use ---
By purchasing this design on Cults, you support my work and receive a commercial license to sell physical 3D prints of the model
Click here to purchase the design and get the commercial license (or just type "Drak3D" in Cults Search)
Ready print Profiles for Bambu Printers on MakerWorld, link Below:
Consider SUPPORT MY WORK downloading the models from MakerWorld
This costs nothing, just little bit of time
https://makerworld.com/en/@Drak
There is also a option of Boosting the model On Makerworld, it gives me points as a revand :D
Every download counts!
I appreciate any help <3
Narrower design will be published soon!
