10mm (Gauge 1) scale Ffestiniog Wagons
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Files for some Ffestiniog based Bolster, Flat And Slate wagons
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 887
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
These are some wagons based on designs from the Ffestiniog Railway in more or less 10mm narrow gauge (1:32) scale. They are LEGO gauge but could definitely be modified to O gauge or smaller. (or just scaled up).
All files print as one sheet of parts and will fit any printer, .1mm layer height and 20% infill recommended.
1/8th steel or brass rod is needed for axles, and some .5mm wire to make the u clips that hold the axles into their holders. The Bolster wagons also require one screw each (around m2 size) to hold the swiveling cradle on and some 1mm rod for the posts on those. The slate wagon requires some 1mm rod to make the posts between the slats. Otherwise just glue and paint.