R-8 Collet Storage Tube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These simple tubes are for R-8 machine collets.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 215
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
My R-8 collets were not sent to me in their typically tubes, but in a cheap flat pack. This made it difficult to get them out of the flat pack and pick the correct size the first time. These tubes are simple in design and easy to print. The tube length is just shy of the top concave surface, allowing for fingers to grip the edges to remove the collet from the tube. These were printed in PLA. I decided to not have keys/slots to fit the tubes together to allow for the thinnest, quickest parts to print and attached them together with rubber bands. If I wanted to, I could glue them together in a configuration, but I don't want that permanent of a setup.
Print Settings:
Nozzle: .6mm
Layer Height: .45mm
Perimeters: 2
Print time (quantity 1): 1 hour (mostly perimeters)