Customizable Brochure Stand (A4 size) - Various Versions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Display stand for A4 sized brochures with / without a customizable insert
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 41
- Wydruki
- 2
- Wyświetlenia
- 139
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Display stand for A4 sized brochures, various Versions - with or without a fully customizable insert, one with the insert in the center and one with the insert on the left.
The insert can be customized in Prusa Slicer, you can add an engraving or embossing, print it multicolor, or you throw it under a laser and do some engraving there (that's what I did) and I also added a step file of the insert, so you can also modify it in your favorite CAD program.
The insert is oriented / printed face down and is glued into the corresponding slot in the base with the chamfered / back side.
Import the 3mf file as project and everything is ready to go, only adjust your printer and filament.
If you need the insert or the stand adjusted to a different size, a wider slot or a bigger slot width (10mm by default), just drop me a message and I can modify and upload the file :)