1 / 5
Ford FITS Press Fit Cubby Blank (2022 Ford Maverick) — zdjęcie 1
1 / 5

Ford FITS Press Fit Cubby Blank (2022 Ford Maverick)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a blank designed to cover up the cubby hole on the dash. This is a remix - I modified the dimensions a tiny…

Ocena
5 / 5
Polubienia
21
Pobrania
104
Wydruki
1
Wyświetlenia
1931
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

This is a blank designed to cover up the cubby hole on the dash. This is a remix - I modified the dimensions a tiny bit, filled in the holes, and added a grab bar. I printed this on a Creality Ender 3 with eSUN PETG using the following settings:

Print Temperature: 245

Plate Temperature (Initial Layer): 80

Plate Temperature: 70

The rest of my settings were autoapplied via the eSun Black PETG with 0.4mm nozzle extruder settings in Cura 4.13.

Print time total was 1 hour 58 minutes.

Fitment was tested in the cubby hole without the pad installed.

Original Link: https://www.thingiverse.com/thing:5208482

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

20%

Filament: eSun PETG Black

Category: Automotive

Tagi