Ford FITS Baofeng UV-82C Mount (2022 Ford Maverick)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a stand / hanger to hold a Baofeng UV-82C. I designed this to work with a FITS slot attached to an adapter…
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 1450
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a stand / hanger to hold a Baofeng UV-82C. I designed this to work with a FITS slot attached to an adapter that fits in the cubby hole on the dash. I printed this on a Creality Ender 3 with eSUN PETG using the following settings:
Print Temperature: 245
Plate Temperature (Initial Layer): 80
Plate Temperature: 70
The rest of my settings were autoapplied via the eSun Black PETG with 0.4mm nozzle extruder settings in Cura 4.13.
Print time total was 9 hours 15 minutes.
Fitment was tested cubby hole box and in rear center console FITS slot.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Yes
Supports:
Yes
Resolution:
0.2
Infill:
20
Filament: eSun PETG Black
Category: Automotive