1 / 18
Fresh Hurricane Mini Siren (kinda 1/4 scale ACA Hurricane MK2) — zdjęcie 1
1 / 18

Fresh Hurricane Mini Siren (kinda 1/4 scale ACA Hurricane MK2)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fresh Cane uses a 130 DC motor that is dual shaft. The blower is not included, but I'll show the type of blower used.

Ocena
5 / 5
Polubienia
12
Pobrania
139
Wydruki
4
Wyświetlenia
769
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Fresh Hurricane is the twin of 3D Hurricane, but with differences. He is the size of a 1/4 scale Hurricane, so not that large. It doesn't matter what chopper goes to which stator. You can get the blower anywhere like Walmart or Menards. If you want to add the "3D" logo, there is a picture of the logo with measurements. The horn may be loose when connected to the rotor tube, so you might have to glue the horn on. There is now a new rotor tube design and horn design where the horn and rotor tube looks smoother with the sides. There is also a new rotor tube with the wire hole at the bottom of the rotor tube. The horn is more thinner for a lighter head and for any future rotation update.

There are 2 rotator boxes. if you want to risk your filament (for some reason), go for the solid rotator box, but if you want to save on filament, go for the hollow rotator box and print the bottom to complete it. This Hurricane does not rotate, it is meant to be stationary. The reason why it has a 4, 5, and 6 port choppers because it makes the siren louder which would make sense with its size. Using a normal 8, 10, or 12 port choppers would make the siren not very loud. THIS THING IS NOT WEATHER PROOF