Nano SIM Card Travel Case modified for OnePlus SIM Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modified SIM tray designed to fit the OnePlus SIM tool. Still compatible with the original sleeve.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 232
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really liked the SIM Card Travel Case by Peter, however, the SIM tool I own didn't fit. The SIM tool I wanted to use was the one I got back with my OnePlus 3. So I modified the cutout size. Since the OnePlus SIM tool is way larger than the one used in the original version, this model has room for just 4 nano SIM cards instead of 7.
Print Instructions
SIM Card Tray
0.08 mm layer height
PLA or any other rigid filament
Sleeve
You can find the file for the sleeve on the original model page
The sleeve needs to be printed standing upright on one of its flat sides
It must be printed in vase mode
I used a line width of 0.42 mm with a 0.4 mm nozzle to get a snug fit of the sleeve