Swinging Desk Phone Holder with Power Lead Access
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A swingarm to hold an iPhone 6 (or similar with or without a case)
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 856
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Swinging Desk Phone Holder
NB: The desk doesn’t swing. And it’s not a swingin’ 60’s retro thing, either.
It accommodates a phone up to 72 mm wide and 10 mm thick. Scale to fit a smaller or bigger phone and use appropriately sized screws.
This is designed to screw onto the edge of a desk.
Material: PLA, PTEG, etc
Layer height: 0.2 mm
Nozzle: 0.4 mm
Infill: None
Supports: None
Brim: 4 mm brim only on the pin
Assembly is fairly obvious: push the top_hinge into the slot at the side of the holder, line up the bracket and slide in the pin. Screw it to whatever you want.