Vintage-style label plate for upcycling boxes etc.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A reproduction of an antique metal label plate, designed for reusing/upcycling filament boxes
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This reproduction of an antique metal label plate is designed for reusing/upcycling filament boxes, as seen in the pics. But you can also probably find other ways to use it. It prints super quick, and needs no supports! It comes with two “screws” (they are actually pins designed to look like old-style screws) which you can press into and through the cardboard box to hold the plate in place. If that doesn't work for your situation, glue (or real screws!) should work fine.
There are two versions of the label. One is solid, with an area where you can write directly on the plate (try painting it with chalkboard paint!) or attach a sticker. The other has an opening in the middle so you can put the label behind the plate. Both are of a size that works with regular filament boxes as well as some smaller boxes like Bambu refills.
The open version in the pics was printed with Bambu Basic Gold PLA, but I used Antique Gold Rub ‘n’ Buff over that to get the metallic look I wanted. The solid version in the pics is just the plain gold filament. You could also spray paint them with metallic paint, print them in metal filament, or anything else you like. They are great for using the filament boxes we all end up with so many of.
A suggestion: you might consider printing it with ironing on, so that the top layer doesn't show those tell-tale printing lines. I haven't tried that yet, but I expect it should look pretty good that way.
These plates were inspired by Bigb8's Almost Vintage plates at https://www.printables.com/model/37435-almostvintage-a-way-to-prettier-storage, but I made mine completely from scratch (in Tinkercad!) to get the exact antique look I wanted, referring to images of antique drawer pulls and label plates. Thanks to Bigb8 for inspiration!