1 / 4
Indestructible Hairdryer Wall Mount – No Screws! (PETG Optimized) — zdjęcie 1
1 / 4

Indestructible Hairdryer Wall Mount – No Screws! (PETG Optimized)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Are you tired of wall mounts that snap or requires drilling holes into your bathroom tiles? This hairdryer holder is des

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
57
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Share Alike

I have been using this model daily for over 7 months on bathroom tiles, and it hasn't budged or shown any signs of fatigue.

Key Features:

  • Zero Drilling Needed: Designed specifically for thick, foamy double-sided mounting tape. Two horizontal strips on the back provide an incredibly strong bond. No screws, no holes, no mess!

  • "Toss-Proof" Durability: The arms are engineered to be slightly flexible. Even if you "launch" the hairdryer into the mount or use a heavy professional model, the arms will flex without snapping.

  • Integrated Cable Management: Features two built-in clips on the sides to keep your cable organized and off the floor.

  • Heat Resistant: When printed in PETG, it easily handles the residual heat from a freshly used hairdryer without deforming.

  • Smart Icon Design: The hairdryer logo is a recessed hole, not a multicolor print. You can leave it as is or fill it with a bit of paint/marker for a custom look (as seen in the photos).


Print Settings & Recommendations

To achieve maximum mechanical strength and perfect layer adhesion, please follow these settings:

  • Material: PETG is highly recommended for its elasticity and thermal resistance. (PLA can work but is more brittle and sensitive to heat).

  • Nozzle: 0.4 mm.

  • Infill: 15% Gyroid (best for structural integrity).

  • Warping Control: Use "Mouse Ears" or a standard brim to prevent the corners from lifting.

  • Hotend Temperature: Increase your usual PETG temp by +5°C (e.g., if you usually print at 235°C, go to 240°C) to ensure superior inter-layer adhesion.

  • Cooling (Crucial for strength):

    • Min fan speed threshold: 0%

    • Max fan speed threshold: 30%

    • Min layer time: 30s

    • Max layer time: 12s
      (Reducing cooling ensures the layers fuse together perfectly).

Tagi