Audi E-Tron door trash bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A trash bin that fits neatly in the front door pockets of the Audi E-Tron
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 287
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I didn't want to just throw wrappers, napkins etc. directly in the door storage pocket, so instead designed this to fit as snugly as possible in the rear half of the space, without blocking the front half where a bottle/mug can still fit (since the center console space is pretty underwhelming for such a big car).
Prints barely on the Prusa Mini, standing up at an angle and with some supports. Included the 3mf print project file, which I normally don't upload, just so you don't have to go through the same bother. If you have a bigger printer, just print it with the bottom face down like normal. There will be some overhang in the rear but better to add a tiny amount of internal support if you really need it.
It's not perfectly optimized for the available space, but it was as close as I could get it with the available time. If you want to, I'm sure it can be fine tuned a bit to gain some additional volume.