Newspaper Soil Pot Maker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a tool designed to recycle newspaper into seed starting soil pots.
- Ocena
- 4,5 / 5
- Polubienia
- 44
- Pobrania
- 181
- Wydruki
- 3
- Wyświetlenia
- 1019
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
This is a seed starting soil pot maker that utilizes old newspaper, or any NON GLOSSY paper to make small pots to start seeds in. Use a 3.5" x 11" piece of paper for best results.
I printed this using Polymaker's Polyterra Eco-Friendly PLA to lessen my environmental impact!
Usage:
- Step 1: Cut strip of paper 3.5" x 11" (89mm x 280mm)
- Step 2: Wrap paper strip around handle
- Step 3: Fold bottom of strip over handle end
- Step 4: Push handle and paper into base and twist several times
- Step 5: Remove newly formed paper pot and fill with potting soil
- Step 6: Plant seed and grow things!
- Step 7: #HackTheWorld & #MakeAwesome!!!!
*Note: This post contains Amazon Affiliate links that support The Makers Workbench via a small commission from any sales they help generate.
Design File Included: .stl .f3d, step, .skp and obj files.
Follow The Makers Workbench on:
I have only tested this model using the default 0.35mm FAST preset in Prusa Slic3r 2.2.0 with the following amendments made.
- 6-perimeters
- 5-top layers
- 5-bottom layers
- 20% infill
- Cubic Infill
- Monotonic Top and Bottom Pattern
PLA Used: Polymaker Polyterra Eco Friendly PLA - https://amzn.to/3qPYtzV