1 / 4
Qi2 MagSafe Car Mount – Snap-Fit Holder for Baseus 60.5x11mm Puck — zdjęcie 1
1 / 4

Qi2 MagSafe Car Mount – Snap-Fit Holder for Baseus 60.5x11mm Puck

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Snap-fit Baseus Qi2 (60.5mm) holder with 1/4"-20 insert. Simple, strong car mount for camera-style arms.

Ocena
0 / 5
Polubienia
0
Pobrania
7
Wydruki
0
Wyświetlenia
84
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Open Community License v1

Baseus Qi2 MagSafe Car Mount – 1/4"-20 Snap-Fit Holder

Simple and solid snap-fit holder for the Baseus Qi2 / MagSafe charger (60.5mm × 11mm).

Designed to mount to standard 1/4"-20 arms (Ulanzi, SmallRig, suction mounts, etc.) using a brass heat-set insert.

The puck is press-fit and retained from the sides.
Open top and bottom for easy access and cooling.
Cable exits freely from the side.

Printed in ASA at 45° orientation for improved heat resistance and strength in car environments.


Requirements

  • Baseus Qi2 puck (Ø60.5mm, 11mm thick)

  • 1/4"-20 brass heat-set insert (8mm hole, 9mm depth)


Print Recommendations

  • ASA or PETG (PLA not recommended for cars)

  • 3–4 perimeters

  • 20–30% infill

  • Print at 45° for best strength

  • Tree supports


Clean, minimal, and compatible with proper camera-style mounting hardware.

Tagi