Hoto Flexi Scrubber Hybrid Mounting System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall Mount or 1/4" Pegboard Mounting System for the Hoto Flexi Scrubber
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed an organizer system for the Hoto Flexi Spin Scrubber (QWQJA08) that can mount to either the wall using #10 screws or pegboard mounting screws for a 1/4" pegboard.
Overview
The system consists of six discreet components that are meant to be used based on your needs. All parts that accommodate mounting hardware can mount to either a bare wall or 1/4" pegboard. Two different spacer sizes are offered to help space and align the different components of the system but they are not required.
Charging Dock
The charging dock is meant to hold the wand and charge it while it's connected to the wall. It uses an interlocking dovetail to hold the wand cradle to the portion that attaches to a wall. The cradle is designed for the charging cable that comes with the flexiscrubber. Its fairly short so I'd recommend a male-female usb extension cable to reach a plug.
Due to the gasket cover for the port the wand needs to be plugged in backwards to keep the gasket held out of the way of the plug. It's not an ideal solution but I felt removing the gasket would put it at risk of water damage.
Attachment Mounts
Like the charging dock, it uses an interlocking dovetail to hold the magnet socket to the portion that attaches to the wall.
The mount is designed for a 15mm diameter, 2mm thick disc magnet. Even cheap ones are strong enough to hold any of the attachments to the mount.
Scrubber Pad Holder
Designed in two interlocking parts to shorten print time and maximize strength. Designed to store the spare scrubbing pads not on the pad attachment though the design allows for more spots to be added to meet your needs. The sponge pads are a tight fit by default.