Zesty Nimble V2 Cap/Collar Fix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Nimble V2.0 has a serious design flaw which becomes very obvious when the Nimble is used on the E3D Toolchanger.…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
The Nimble V2.0 has a serious design flaw which becomes very obvious when the Nimble is used on the E3D Toolchanger. The cap that mates the rotating cable housing to the top of the Nimble body is locked in place with 3 very tiny tabs which break off real easy. This replacement cap uses the 2 bolts that sit next to the cap and also has a longer throat to hold more of the cable housing.
Print it in Nylon 910 at 250C straight up/down with supports for the bottom and the side tab.
To hear more about this thing and many other 3D Printing related topics check out my podcast; 3D Printing Today
threedprintingtoday.libsyn.com
or search for "3D Printing Today" wherever you get your podcasts.
Its free with no ads.
Print Settings
Rafts:
No
Supports:
Yes
Resolution:
.2 mm layer
Infill:
25%
Filament: Taulman Nylon 910 Black
Notes:
250C
Category: 3D Printer Extruders