Marlin | Foam Dart Crossbow Blaster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A low hardware elastic driven foam blaster that works similarly to a pistol crossbow, with surprising performance.
- Ocena
- 4,615 / 5
- Polubienia
- 127
- Wydruki
- 13
- Wyświetlenia
- 3640
- Oceny
- 13
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Standard Digital File License
Overview:
Super Low Hardware
High performance due to long draw
Different versions for longer or shorter layouts
Included Iron sights and grip to help you prime
Single shot breech loader - Can take full length darts (Please be aware that these darts will perform extremely poorly or just outright jam when accelerated this violently, if you wanna use them, consider using less string tension)
Printing and hardware:
Tested with three walls and 20% Gyroid infill, no supports
If you dont fully trust your filament print load bearing parts (PrimeFrame, Grips, Bowlimbs and Primebars) with 5 walls
4mm elastic string required (this stuff), 5/32 Works too. Keep in mind there is a lot of variation between different strings.
Weight: 690g at the heaviest configuration, about 480g at the lightest
Will fit on a 180mm³ Printer (that means it fits on a A1 Mini or prusa mini), if you angle certain parts diagonally on the plate.