CloneR1 Power Supply Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For the 50 or so people who bought the way ahead of it's time CloneR1 Beta from Carl Raffle back in about 2015... Ever…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
For the 50 or so people who bought the way ahead of it's time CloneR1 Beta from Carl Raffle back in about 2015...
Ever have to remove/replace the PS? Getting it back on is tricky and the exposed terminals are a bit close to the controller board.
This mount makes it a lot easier and it also protects the exposed terminals from falling metal bits or arcing. I made this mount as I was replacing the CloneR1 motherboard with a DuetWifi. A VERY big improvement! To hear the full story listen to the podcast! 3D Printing Today. It's free. No advertisements. We do it for fun and we do it for YOU!
threedprintingtoday.libsyn.com
or
Search in thew iTunes Store or Stitcher radio or Spotify for
"3D Printing Today"
Print Settings
Printer Brand:
MakerBot
Printer:
MakerBot Replicator 2
Rafts:
No
Supports:
No
Resolution:
.2mm layer height
Filament:
MIcro center PETG
Notes:
Note I used PETG. PETG is way less flammable then ABS or PLA and a PS can arc.
This thing was designed using the oh-so-awesome Fusion360Category: 3D Printer Parts