Angel with missing hand - Enscan-S Sample Scan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a capture of an angel statue using the Einscan-S. This capture used the turn-table. It took 3 rotations, one…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 529
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
This is a capture of an angel statue using the Einscan-S. This capture used the turn-table. It took 3 rotations, one standing up, one facing down and one facing up. No touchups were done to the resulting stl file. As you can see the result is not bad. Some loss of feather detail inside the wings but overall, not bad.
This is discussed with a lot more detail about the Einscan-S scanner in an upcoming episode of the 3D Printing Today podcast: threedprintingtoday.libsyn.com
Category: Sculptures