Lost In Space Robot - B9 - Parted
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Robot from the TV show Lost In Space.The model was sliced up into separate parts to make it easy to print with most…
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 464
- Wydruki
- 1
- Wyświetlenia
- 2529
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Share Alike
Robot from the TV show Lost In Space.The model was sliced up into separate parts to make it easy to print with most FFF/FDM hobby 3DPrinters. The file was derived from the file uploaded by cerberus333. It was chopped up and repaired using NetFabb.
This Thing is a featured Thing Of the Week on the 3D Printing Today Podcast! Http://threedprintingtoday.libsyn.com.
Shows are now posted on our feed twice weekly!
Instructions
Having B9 chopped up makes it much easier to print. No supports needed for the feet, legs, face and dome. The body and the scanners DO need supports.
Each part has a flat surface on the bottom for easy build plate stick as well as easy glue assembly.
The scanner part is exceptionally fragile in the current scale. Scaling up a bit should make it much sturdier.
Category: Model Robots