1 / 5
Carrera 132 Mercedes AMG C63 DTM Rear Wing / Spoiler / Heckspoiler 1:32 Slotcar — zdjęcie 1
1 / 5

Carrera 132 Mercedes AMG C63 DTM Rear Wing / Spoiler / Heckspoiler 1:32 Slotcar

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A rear wing (spoiler) for the Carrera 132 (evolution or digital) Mercedes C63 AMG C63 Slotcar.

Ocena
0 / 5
Polubienia
6
Pobrania
97
Wydruki
0
Wyświetlenia
289
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

Heckspoiler für Carrera Mercedes AMG C63 DTM

im Maßstab 1:32

Es wird empfohlen den Spoiler wie auf den Bildern gezeigt zu drucken (Rückseite nach unten auf Druckplatte) damit die Streben möglichst stabil sind.

Nach dem Drucken ist etwas Schleifen mit feinem Sandpapier auf der Rückseite notwendig, wo die Stützen befestigt waren.

Ich habe die *.f3d Datei aus Fusion360 mit angehängt, falls man selbst noch Änderungen vornehmen möchte oder den Maßstab ändern muss.

*******************************************************************

Rear wing for Carrera Mercedes AMG C63 DTM,

Scale 1:32

It is recommended to print the spoiler as shown in the pictures (back side down on the print bed) so that the struts are as stable as possible.

After printing, some grinding with fine sandpaper is necessary on the back where the supports were attached.

I also attached the *.f3d file (Fusion360) in case you need some own modifications or you want to Change the scale.

*****************************************************************

Print Settings / Druckeinstellungen:

Material PLA or TPU

100% Infill

0,1mm Layer

Brim / Raft  (for adhesion)

Supports on!

Tagi