Buggy / Stroller Handle Extension (Babyone, Bebeconfort, Fillikid, ...)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attachable handle to extend the effective Buggy handle height by ca. 5cm. Fits Babyone, Bebeconfort, Fillikid, .. buggys
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
A snap-on extension to raise the handle height of "standard travel buggys" for ergonomic reasons and comfort.
Fits the following travel buggys / strollers to my knowledge:
Babyone Little One
Bebeconfort Peps
Fillikid Buggy Traveler Exclusive
FILL Buggy
Osan Buggy
And all others with the characteristic handle shape.
Make a comment if you find another brand name to be added to the list.
If you are not 100% sure, a lightweight test-print prototype model is available to check the correct fit before printing the actual mode.
Important printing notes:
Activate "Bridge counterbore holes"->"Partially bridged" to obtain clean counterbore holes
Print with at least 4 wall loops
Choose a strong infill pattern
infill density min 8%
Deactivate brim to get smooth edges, or consider sanding the edges after printing.
(Other than that I used 0.2mm layer height, 0.4mm nozzle)
For two handles you will further need
12x M3 cylinderhead screws with 25mm length
12x M3 nuts
4x 3.5..4mm zip ties
Simply print both halves and screw them together. The zip ties reinforce the handle at a critical point where heavy forces occur when twisting the handles.
The handles have been proven functional and robust in already two weekend city trips! :) Have fun