SureFlap Microchip Cat Door PetSafe D-Size Battery Extender
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces AA batteries with D size batteries for longer time
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
The Sureflap cat door uses 4 AA batteries that don't last very long; this design uses D-size cells that last months (5 or more) instead of AA cells that last about 3 weeks. You can't use rechargeable batteries in the Cat flap door they won't work for some reason; but the D batteries work fine; I've actually been using them for years now. But recently designed this 4 cell tube after my 4 cell purchased battery holder (side by side) started loosing connection locking the cats out/in.
You'll need to wire to your flap with wire with soldering or alligator clips inside the flap battery compartment (the LEFT flap battery connectors - viewed from inside)
Note; I printed one long tube 260mm on my K2Plus which too big for most printers; I split the tube in half that screw together for smaller printers.
Battery Contacts are D Cell Battery IEC R20 Leaf Spring Contact Metal Plate 3-Set Pack Brand: Plantmate from Amazon (https://www.amazon.com/dp/B09B1JY89Y?ref=fed_asin_title)
Wiring: use 20awg wire and drill a hole to get the wires inside the tube and route them to the end battery contactors and solder and then run the wires to the SureFlap and secure with clips or solder.