1 / 3
Door Knob / Türgriff — zdjęcie 1
1 / 3

Door Knob / Türgriff

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Türknauf (40mm). Griff Ø30mm, Sockel Ø10mm. 2,5mm Loch für 3mm Schrauben. Stabil & ergonomisch. Ideal für Schränke.

Ocena
0 / 5
Polubienia
0
Pobrania
8
Wydruki
0
Wyświetlenia
37
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Türknauf / Möbelgriff (40mm) – Schlicht & Ergonomisch

Dieser kompakte und robuste Türknauf eignet sich ideal als Ersatzgriff für Schubladen, Schranktüren oder kleine Boxen. Das Design ist schlicht gehalten und liegt durch die abgerundete Oberseite gut in der Hand.

Technische Details:

  • Gesamthöhe: 40 mm

  • Durchmesser oben (Griff): 30 mm

  • Durchmesser unten (Sockel): 10 mm

  • Sockelhöhe: 20 mm

  • Schraubloch: 2,5 mm (Optimiert für 3 mm Schrauben, damit sich das Gewinde fest in das PLA schneidet).

Druckeinstellungen:

  • Material: PLA, PETG oder ASA

  • Wandlinien: 3-4 (für einen stabilen Halt der Schraube)

  • Infill: 20-25%

  • Support: Ja, für den Überhang des Griffs erforderlich.

Montagehinweis: Das Loch ist mit 2,5 mm etwas enger als die Schraube (3 mm) konstruiert, damit diese ohne Vorbohren einen festen Sitz im Material findet.

Door Knob / Furniture Handle (40mm) – Simple & Ergonomic

This compact and sturdy door knob is perfect as a replacement handle for drawers, cabinets, or small boxes. The minimalist design features a rounded top for a comfortable grip.

Technical Details:

  • Total Height: 40 mm

  • Top Diameter (Grip): 30 mm

  • Bottom Diameter (Base): 10 mm

  • Base Height: 20 mm

  • Screw Hole: 2.5 mm (Optimized for 3 mm screws to ensure a tight thread-cut into the PLA).

Print Settings:

  • Material: PLA, PETG, or ASA

  • Wall Loops: 3-4 (Essential for screw stability)

  • Infill: 20-25%

  • Support: Yes, required for the overhanging grip section.

Assembly Note: The hole is designed at 2.5 mm to be slightly narrower than the 3 mm screw. This allows the screw to bite firmly into the plastic without the need for pre-drilling.

Tagi