1 / 8
Novel Hovel - Book and Phone Holder — zdjęcie 1
1 / 8

Novel Hovel - Book and Phone Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A little combo bookmark/rest and cup holder. With optional extender for bigger books.

Ocena
0 / 5
Polubienia
7
Pobrania
7
Wydruki
0
Wyświetlenia
120
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Still reading those paper books? I present to you the Novel Hovel. Put your book down and don't lose your page. Take a sip of that java or cuppa if you prefer. Save that spine. Put your reading classes where you will be able to find them every time. Made to fit on an armrest or night table. Take it apart and take it on the plane. You decide where to get your read on. Oh, it holds a phone or tablet too. 

The main body is for small to medium paperbacks. Add the extender for larger books. It goes together best with Top1 inserted into the base first and then Top2 inserted second. Rinse and repeat. Tolerances are close so give the top pieces a good whack to insert into the base.

Modelled on SolidWorks. Printed with 15% infill on Ender 3 V3 KE. Base was printed standing up with only base support because 240mm is my max. The cup slot had a slight imperfection from printing that way, so it could use some support or print it flat in larger printers. Print the base without holes if not wanting the extender attachment.

Could use a very tiny bit of fine tuning. I may make a version 3.0. But I may not too.

Tagi