Corner mount for Everything Presence Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for the Everything Presence Pro to mount in the upper corner of a room.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 424
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a ridged corner mount for the Everything Presence Pro, but should also work with the Everything Presence One and Everything Presence Lite since I believe they all use the same mounting point on their cases.
It is designed to hold the EPP at a 45° pan and 45° tilt to maximize coverage in a small to medium room.
Power cable can be run down from the ceiling and into the hole in the back of the EPP case, or you can use a right-angle USB-C or right-angle RJ-45 ethernet cable.
The mount attaches to the wall with a single screw into the corner, or you can use 3M command strips, double-sided tape, or velcro.
The model prints just fine with no supports on my Creality K1 in PETG or PLA