1 / 3
Lucky 13 CRT Monitorhead
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some days you're a robot, some days you're a monitor, some days you're a robot with a monitor for a head!
- Ocena
- 5 / 5
- Polubienia
- 145
- Pobrania
- 378
- Wydruki
- 1
- Wyświetlenia
- 1874
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (223)Powiązane
This CRT Monitor should print up quite easily using the same settings you had on your Lucky 13. I recommend supports on build plate only, but be sure to place a support blocker inside the small neck stem hole; there's no way you're getting supports out of there easily! To get a nice glossy screen, a good coating of clear nail polish does the trick!
Brownie points if you print it in beige!