Padel Racket Wall Mount with TPU Pads (Scratch-Free)

🎾 Padel Racket Wall Mount with TPU Pads

This 3D printable padel racket wall mount is designed for safe, scratch-free storage of your racket.
The racket rests on the throat, keeping it stable, aligned, and protected without stressing the frame.

A key design goal was protecting the racket and the printed part over time, which led to two important features.

🎾 Also available for tennis rackets!
Check out the Tennis Racket Wall Mount with TPU Pads

🛡 TPU Protective Pads

The racket never touches rigid plastic.

• Prevent scratches on the frame

• Absorb small vibrations

• Provide a firm but gentle contact

The pads are printed separately in TPU and glued in place (or just slided-in if your tolerances are good).

🔩 Conical Washer Discs (Required)

The conical washer discs are required parts, not optional.

• They distribute the load under the screw head

• Reduce stress on printed layers

• Help prevent layer separation when tightening screws

This makes wall mounting safer and more reliable, especially on hard surfaces.

🖨 Recommended Print Settings

• Main body: PLA or PETG

• Pads: TPU 

• Conical washers: PLA or PETG

• Layer height: 0.2 mm

• Infill: 15-20%

• Supports: As showed in picture

🧩 Things to Print

• 1× Main Body
  Material: PLA or PETG

• 1× TPU Pad – Left
  Material: TPU

• 1× TPU Pad – Right
  Material: TPU
  

• 2× Conical Washer Disc
  Material: PLA or PETG
  Note: Required — print this file twice

🔩 Additional Hardware (Not Printed)

• 2× Wall screws (size depends on wall type)

• 2× Wall plugs / anchors (if needed)