Music Box Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3" diameter base for a small, hand-crank music box movement.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
Very simple model of a music box enclosure, designed to fit one of the hand-crank music box movements inside with the crank handle sticking out through a hole. There are four small protrusions from the bottom to lift the box off the table for sound.
I recommend printing the model with enough perimeters and top/bottom layers to make it solid, it will resonate the sound better. I printed with basic PLA, 4 perimeters and 5 top & bottom layers.
In my case, I paired the base with @Deshi_141831's model of the mail owl and installed a music box movement with Hedwig's Theme. The base was printed separately, upside down without supports. The owl was glued on top after printing.