1 / 16
Replica of Ral Partha Pack 01-111 — zdjęcie 1
1 / 16

Replica of Ral Partha Pack 01-111

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a replica of the classic figure set from Ral Partha, 01-111, "Demons (3) with Separate Heads (4). ( See…

Ocena
0 / 5
Polubienia
2
Pobrania
19
Wydruki
0
Wyświetlenia
356
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
People
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a replica of the classic figure set from Ral Partha, 01-111, "Demons (3) with Separate Heads (4). ( See http://www.miniatures-workshop.com/lostminiswiki/index.php?title=Personalities_and_Things_that_go_Bump_in_the_Night#01-111 )

This set was part of their "Personalities and Things that go Bump in the Night" series.

I have included separate files for all 4 heads, the 3 bodies, plus the 3 composite models I test printed. Shown are model A with head 1, model B with head 3, and model C with head 2.

This set was very challenging to scan and to print. I hope you enjoy it.

Scan made using https://www.thingiverse.com/thing:1762299

Print Settings

Printer Brand:

Monoprice

Printer:

Maker Ultimate

Rafts:

No

Supports:

Yes

Resolution:

0.1mm

Infill:

25%

Filament: Hatchbox PLA black


Notes:

To build a demon, select a body and a head (or, what the heck, pick more than one head if you want -- really, the scarier and weirder the better, right?). Then composite the model in your favorite 3D editing software (I use Blender).
I found tree-type supports much better, particularly for the "C" model, for which the supports can be hard to remove without breaking off the head of the staff. For the "B" model, I included a dummy pillar next to the trident to increase the layer dwell time (see the image). Small spikes on top tend to print better that way.

Finally, set Z = -0.2mm to insure a nice flat bottom.

Post-Printing

reverse view of "C" model with head 2

reverse of "A" model with head 1

Reverse of "B" model with head 3

Category: Scans & Replicas

Tagi