1 / 8
Raw Gopro mount components for designing mounts (Unfinished parts for your own design use)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
So these aren't really meant to be printed as is but this is me sharing the raw components I made to design custom…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Public Domain
So these aren't really meant to be printed as is but this is me sharing the raw components I made to design custom gopro mounts. I made these pieces in tinkercad and am using them as parts to work with to design my own mounts. This will save you the trouble of chopping parts off other existing mounts to make your own. Included is the following:
- 2 finger gopro mounting piece: 2 fingers attached to a 3mm base. Each finger is 2.8mm wide and there is a 3.4mm gap between them. Fingers have holes for M4 screw.
- 3 finger gopro mounting piece: 3 fingers attached to a 3mm base. Each finger is 2.8mm wide and there is a 3.4mm gap between them. Fingers have holes for M4 screw. One side has hole for mounting a M4 nut
- Single 2.8mm thick finger with hole for mounting screw. No base or attachment on bottom. bottom needs to sit on the mounting point.
- Single 2.8mm thick finger with hole for mounting screw and hole for M4 nut. No base or attachment on bottom. bottom needs to sit on the mounting point.
- Round M4 nut attachment with support for M4 gopro screw.
- 1/4-20 nut attachment with support for tripod mount.
I don't need to be credited. Hopefully this will simplify your own design process when making mounts for Gopros
Category: Camera