1 / 4
HP 3.5" Hard Drive HDD Screw ProDesk EliteDesk 400 600 700 800 480 680 880 G1 G2 G3 G4 G5 SFF MT Tower — zdjęcie 1
1 / 4

HP 3.5" Hard Drive HDD Screw ProDesk EliteDesk 400 600 700 800 480 680 880 G1 G2 G3 G4 G5 SFF MT Tower

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Pretty simple designs. Not perfect but work well. I made these because the other ones I was seeing required purchasing…

Ocena
0 / 5
Polubienia
7
Pobrania
123
Wydruki
0
Wyświetlenia
579
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Share Alike

Pretty simple designs. Not perfect but work well. I made these because the other ones I was seeing required purchasing special screws from the hardware store. I haven't verified all the model numbers in the title but they should be good. These won't work with the mini PCs.

There are 2 different designs:

"HP 800 G3 3.5 HDD Screw.stl" requires the torx 15 round screw HP uses for the power supply and motherboard. My thought was you can yoink those screws and replace them with regular coarse thread case screws. This design fits a little snug but is closer to the factory screw.

"HP 800 G3 3.5 HDD Screw Washer.stl" is just a washer with the spacing that matches the original factory screw. Put a normal hex head coarse thread case screw through the hole and you are good to go. The drive will install a little loose but should be good enough to be fine.

Video of me showing them off: https://youtu.be/54IoKaJrJBo

If you need the torx 15 screws I have some I am selling that will work: https://www.ebay.com/itm/226584359424

Tagi