Arrma Granite 223s V4 Wing No Cutting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wing for your V4 granite without cutting the body.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 110
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wing Installation (Arrma Granite 223S BLX V4)
Attach the wing to the bed protector using the two center bolt holes.
Place the assembled wing and bed protector onto the truck.
Secure the wing by installing the outermost screw and nut through the body and into the underside brace.
Use the bed protector as a template to drill the six mounting holes in the truck body.
Apply purple Loctite to the hardware if desired.
Mounting the wing this way eliminates the need to cut the body while still allowing crash forces to transfer through the wing into the body post and bulkhead.
Print Settings
Material: TPU
3 perimeters
15% infill (any type)
I chose honeycomb since I can see the pattern with translucent TPU.
This is part of a 5 part set for the Arrma Granite 223S BLX V4 only. The set includes a roof rack, headache rack, bed protector, wing, and chassis brace/body lift.