Outfeed Table for Ender EZ Belt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A part outfeed table for the Enter EZ Belt 3D printer from PowerBelt3D! Table extension is tool-less to remove and add.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
A part outfeed table to the PowerBelt 3D Ender EZ Belt! This is meant to attach to the optional 4040 aluminum extrusion at the front of the machine, and provides additional support for longer prints coming off the belt. This adds 260mm of extra bed length!
The main body of the table is attached by sliding it onto the extrusion, and the two t-slot nuts are really just so it does not slide, I could lift the entire printer by the table even without the nuts installed. The bed extension rotates into place with the open hinge, and is held in place by gravity, and the main support legs hold it up at the correct angle.
I plan to make other extensions for even longer items, but that is for another day, for now, here is the outfeed table!
NOTE: The main parts were designed to fit on a Prusa printbed, however, I have also included models that will fit on a 200x200 bed so that more people could print it. I have not made bases for 2040 extrusion, since it would just not be as strong of a connection due to less material to grab the extrusion, clearance for the roller takes that space.