Duplo Crane Crank
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Duplo crane crank replacement part.
- Ocena
- 0 / 5
- Polubienia
- 50
- Pobrania
- 182
- Wydruki
- 0
- Wyświetlenia
- 2689
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
The handle of a Duplo toy crane broke. I decided to replace the whole crank and created a model with multiple parts. They fit together nicely, no glue needed.
The cord is passed through the hole in the axle and fastened with a knot that is hidden inside the axle.
On my first try, the printed handle broke quickly because of the vertical print direction. That's why I decided to split the handle into two parts with a separate pole, so I could at least replace the handle's pole easily. It didn't break since, but if it does, I would try an adjusted layout with a pole that can be printed lying horizontally on the print bed.
The axle needs to be printed with supports.
I printed this model with PLA at 0.15mm layer height with 15% infill.