FFBeast DIY Wheel with Paddle shifters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
FFBeast DIY Wheel. Hoverboard motor, ODESC v4.2, Encoder - MT6825.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 194
- Wydruki
- 0
- Wyświetlenia
- 1324
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
Wheel
Using this template to drill 5 mm holes in motor case:
Central hole in motor case is 14 mm.
Thru hole in motor shaft is 4 mm.
Hole in shaft to mount encoder is 6.5 mm.
Electronics - ODESC v4.2,
Encoder - MT6825.
Bolts to mount adapter to wheel and motor case - M5x20
For cooling can be used 120 mm or 80 mm fan, connected to 24V by DC-DC step-down convertor.
A part of the hoverboard, cut to size, was used as a base for mounting.
M4 holes should be drilled in the base to attach the legs and the resistor.
Wheelbase supposed to be mount form bottom by bolts and heat inserts in wheelbase legs.
Paddle Shifters
2 x Micro Switch MSW-13
4 x Magnets D10x3
Some heat inserts for M3 and M4.
Some M3, M4, M5 bolts and nuts.