1/4 inch compatible Minature Vice 2.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a great desktop vice design by HD_Creator. The main problem is that in the U.S. it is almost impossible to…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 159
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a great desktop vice design by HD_Creator. The main problem is that in the U.S. it is almost impossible to purchase fully threaded M6 bolts over 40mm with hex heads. 1/4 inch bolts are very close, but the designs tolerances are too tight for 1/4 inch to work.
My remix adjusts the knob, block and clamp to work with 1/4 inch bolts and nuts for those of us in the U.S. You will still need M3 bolts for the rest of it.
You will need the original prints design and swap out these parts. You can find the original prints here:
- The Thingiverse post (doesn't have all the files)
- The Vice v2.0
- The table clamp
Hope this makes it easier for some folks.
Category: Tools