Esp-32Cam Video-Rover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here are the necessary parts, that you can change as needed, and I say it, because we used it with a ESP-CAM for Wi-Fi
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a project based on a ESP32-Cam, for this instructables Project: " https://www.instructables.com/Esp-32-Cam-Video-Rover/ "
Some Extra information:
The piece "Wheel-bearing clamping" its adapted for the wheels that I used, and very important, they will fit if you print them Face up, I tried printing them sideways and my printer had problems, but for strength, it would be the best option, as the parts were very fragile, so much so that I would recommend using another shape (material, type of printing... wood...) other than printing them on plastic, this was the biggest problem I had with testing in real life.
The two pieces of “Wheel_fastening_with” are for two options for anchoring to the steering wheels. I tried both, but in the end I opted for the option that uses bearings, which gave me better smoothness than the other option.
More information of all the components and everything you could possibly need, its in the Instructables post that I have left above linked.
I am leaving two photos of the wheel design that was not used in the end, although it is also another interesting option. What I want is for it to look like the wheels I had available. I had to drill a hole, and with that and a nut, the wheel looked pretty good, but the design with the bearing worked better.
This post is an import from my original post on thingiverse that you can find with the exact same name (i first uploaded there before having a printables account).