1 / 1
Sako P94S (Finnfire) Magazine Kit — zdjęcie 1

Sako P94S (Finnfire) Magazine Kit

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Magazine Kit for .22 LR Sako P94S Finnfire

Ocena
0 / 5
Polubienia
3
Pobrania
29
Wydruki
0
Wyświetlenia
135
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Mostly working copy of the Sako P94S (Finnfire) .22 LR magazine. Loads reliably about 80 plus% of the time, I think it mostly due to the home-made spring I'm using, it's hard to get the spring pressure just right. If something goes awry it's normally that the round pops up vertical if you slam the magazine in. The pin that holds the base to the body is 2 mm X 12.2 mm and is a snug press fit. I will continue to mess with and hopefully improve it as time goes on