Beyblade X Bit: Ignition [Bahamut Blitz] [UPDATED]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the Ignition bit based on Bahamut Blitz, photos were used as reference for the bit's creation.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 859
- Wydruki
- 3
- Wyświetlenia
- 3128
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
UPDATE: Ignition is confirmed to be the same height as Under Needle and a NEW VERSION is made under this new information. V3 Is now at the accurate height of 27.6mm
Now it has been confirmed that Bahamut Blitz's bit is called 'Ignition' feel free to print it and try it on your bey!
Print with the finest settings possible, here are my settings:
Z distance for support: 0.12
Interface Pattern: Grid
Interface spacing: 0.1-0.2mm
Support type: Tree Auto
Layer Height: 0.08 (I went with the profile provided in Bambu studio for the P2S with the following changes listed above)
Wall Generator: Arachne