Luke Skywalker's Lightsaber remix (separated by color)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original design by Diogo Sergio is just fantastic!
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 83
- Wydruki
- 1
- Wyświetlenia
- 842
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original design by Diogo Sergio is just fantastic! All I did here was split the model up into a few more pieces so that they can each be printed in the proper color, rather than requiring paint. All except for the upper grip, that is. Which still requires silver striping on the flats if you want it to be accurate to the movie version.
The control box buttons and gold grating piece require gluing, everything else simply screws together. Thanks Diogo!!
Print instructions
Category: Props Print Settings
Printer: New Matter Mod-t
Rafts: No
Supports: No
Resolution: 0.1 - 0.2
Infill: 30%
Notes:
The up and down arrow control box buttons should be printed with a brim at 0.1 mm resolution. You could get by with 0.2 mm on everything else if you want to save some time.