Flexible Filament Adapter Grommet and Collet Clips Centauri Carbon 2 (CC2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are to attach the PTFE tube to the Flexible Filament Adapter for the Centauri Carbon 2.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 183
- Wydruki
- 1
- Wyświetlenia
- 601
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
These are to attach the PTFE tube to the Flexible Filament Adapter for the Centauri Carbon 2. These create a snug fit so the PTFE tube does not come out of the Adapter. File is setup with 3 of each which you will need for the adapter.
Printed the Collet Clips out of PETG and the the grommets out of ABS.
The clips need to be printed either laying on their side or at a 45 degree angle. Due to it being a small part it assist with structural integrity of the part and flexibility.
Note: The file is set for .2 mm Layer heigh, however .16 or even .08mm will be more rigid.