Nerf Artemis Hop-up tabs_ bad precision fix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple replacement piece for the hop-up tab of the NERF Artemis, to fix drop issues.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 88
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Hey hey Nerfers!
My Artemis had the accuracy issue where rounds would just instantly drop to the ground, due to a bad hop-up unit. I made three versions to fix that: the "Normal" (based on the exact dimension of the one I had), the "1mm extra" and "2mm extra".
To install it: open the blaster, remove the cylinder and split it by unscrewing 2 small screws located at the back (use a longer screw driver). Then you have full access to the factory hop-up and can now replace it.
After some testing, I recommend the "1mm extra" version, as it adds enough spin on the rounds and doesn't reduce the fps drastically. You can also go with the "2mm extra" if you want.
Hope this helps and gives a second life to the Artemis!