1 / 1
Toto Mounting Nut for Trip Lever — zdjęcie 1

Toto Mounting Nut for Trip Lever

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a replacement for a Toto toilet mounting nut for a trip lever. It's a one-inch edge-to-edge hex nut, with…

Ocena
0 / 5
Polubienia
4
Pobrania
119
Wydruki
0
Wyświetlenia
427
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial

This is a replacement for a Toto toilet mounting nut for a trip lever. It's a one-inch edge-to-edge hex nut, with 5/8"-18 right-hand thread. Just a handy replacement item if yours breaks, and you don't want to order and wait for a replacement.

I recommend to print in a slightly softer plastic, like PETG, ABS, or at least Tough PLA. Regular PLA may be a bit too hard to clamp nicely to the ceramic of your toilet.

Category: Bathroom

Tagi