1 / 6
Minimal Ratchet / Cargo Strap Clip Holder (25mm), 2.6g only — zdjęcie 1
1 / 6

Minimal Ratchet / Cargo Strap Clip Holder (25mm), 2.6g only

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clip that keeps a standard 3m 25mm cargo strap rolled up, easy rolling, easy release, not losable

Ocena
4,9 / 5
Polubienia
276
Pobrania
649
Wydruki
11
Wyświetlenia
2909
Oceny
10

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Clip is easily fixed at the straps's loop around the lock. 
Fits all standard 2,5/3m x 25mm cargo straps.

22.2.26: Added versions for shorter (1.5-2m) and longer (4-5m) straps.

Strap can be rolled directly "into" the clip, release it by just holding the strap and letting the rolled part fall down.

No need to remove the clip during use, lock is fully operational.

Ideally printed in PETG, works best with 3 perimeters
Standard version needs less than 3g of filament 

Tagi