Hellfire Candy Jar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular candy jar shaped like a hellfire missile
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a cool missile shaped candy jar. The colored bands are printed separately so you can thread more body pieces to make a larger missile. There are two versions of the bands, one solid to split the jar into two components and one hollow to make it one large jar. Blue is typically used for training rounds and yellow for live ordnance. The fins use M3 nuts and i used M3x12 screws. I made each fin with two screw holes but only needed one for the bottom fins as they slot in snugly against the body.
I used tree supports and painted it on the flat surface for the printed bands as well as for the inner lip of the nose. I am going to try to get an SLA lens cap but clear petg with zero infil and .2 layer height isn't too bad.