Warping Board Mk I
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Warping board for use with weaving looms.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Join the printsbyjayy discord server:
https://discord.gg/X9VbhrDzzM
This is a project that was originally posted on thingiverse that is now being cross posted to printables.
This warping board is designed to prepare a warp at about a foot and a half worth of length, and was created to support my Tabletop Weaving Loom Mk. I project.
If you print this project with PLA, please be careful not to over tighten the yarn onto the pegs. My own is printed with PLA and has gone through a few uses without a peg breaking off, but it's most likely best when printed with a stronger filament like PETG or ABS.