SV08 Monolith Gantry
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adaptation of the monolith gantry parts to the sv08 printer, due to the different Z belt paths
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 592
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Extensive effort has been made in the monolith gantry community to optimize gantry design. Please refer to the monolith gantry FAQ on the github page for explanation of design decisions and printing instructions.
This is an adaptation of the monolith 9mm awd parts for sovol sv08. CURRENTLY IN TESTING. I only have one sv08 printer printing the parts for itself and I need your help testing it. Design was made based on the sovol cad models.
The belt clips are retained from the original printer, but the Z mounts are redesigned, as they interferere with the printer. The Gantry is moved forward 1cm to accomodate this change, but should not affect build volume. Rather, build volume is affected by the front motor mounts required for 4wd/awd conversion.
The X and Y axis extrusions can be preserved with minor modification. Only the Y beams required modification of the mounting holes.
Again, this is a work in progress, i'm uploading it here to speed up testing for everyone.