Ironing Speed and Flow Test - Flashforge/Orca-Slicer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Single print ironing and flow test for Flashforge Printers or Orca Slicer users. Does 10-100mm and 10-100% Flow
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 689
- Wydruki
- 0
- Wyświetlenia
- 1415
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
Thank you very much for downloading, hopefully I've been able to help you guys some in your journey.
I have made the ironing test v2 to include 10-100mm/sec and 10-100% flow rate. V1 is still available for download and follows the recommended ironing settings (from google/reddit/etc.)
I was tired of messing up my prints with ironing and I didn't find a model for Flashforge printers. This will test some basic settings and give you a good idea of ironing settings with your filament. It is a bit heavier but it was made thicker to simulate real printers with various infill.
In the global settings of the slicer, adjust your print settings for your project (infill, nozzle settings, speeds, etc.) and the model will auto update. Each change was made at an object level and acts independently.
Small steps to fine tune ironing with your PLA/HS PLA/HS+ PLA
Printer: Flashforge Adventure 5M Pro
Filament: HS PLA
Nozzle: 0.4mm