1 / 3
Han Solo in Carbonite Candle/Soap Mold — zdjęcie 1
1 / 3

Han Solo in Carbonite Candle/Soap Mold

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A candle/Soap/Candy mold of Han Solo when he was frozen in Carbonite.

Ocena
5 / 5
Polubienia
730
Pobrania
969
Wydruki
2
Wyświetlenia
8306
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a two part mold for making a candle, bar of soap, chocolate bars, or whatever you want to make to look like Han Solo in Carbonite.

I made one version with detailed sides which will work if you print in some flexible filament like TPU. I made a flat sided version for those who cannot print TPU. Candles and soap, I suggest PET-G or ABS. Chocolate would be the best in something flexible as well.

If you are going to do a candle, I would suggest scaling up a little, as the mold is a little thin for a candle. Also, be careful with pouring your wax at the proper temp, or you'll get shrinkage like I did from pouring too hot.

I designed it to be held together with clamps so that it doesn't leak when pouring in the medium. 

I suggest printing with 4 side walls and 6 top and bottom layers with 25% infill for best support internally with pouring hot wax, but especially with soap. 

Tagi